Patch settings§
The 2step patch settings mirror the first page of the system settings, which pertain to clock/reset inputs and patch load behavior. The settings here are not used unless the corresponding system setting has been set to defer.
Page 1: Clock and Load§
External clock enable§
Identical to the external clock enable system setting, and used only if that system setting is set to
defer.
By default, the internal 2step clock is used at the w input is readily usable as a CV input. When the external clock is enabled, the internal clock is disabled and the transport controls no longer have any tangible effect—everything is driven by the clock input.
External reset enable§
Identical to the external reset enable system setting, and used only if that system setting is set to
defer.
The external reset will reset all channel step positions and voltages regardless of the current clock source. By default, it is enable, and so the z CV input is reset-sensitive. If you disable this option, the z CV input becomes more easily usable.
(divider row)§
Patch load step§
Identical to the patch load step system setting, and used only if that system setting is set to
defer.
By default, the step position of each channel is reset to the beginning of the sequence when a patch is loaded. You can select the hold option to preserve the step position as the patch is loaded, or saved to recall the step position from the saved patch state.
Patch load value§
Identical to the patch load value system setting, and used only if that system setting is set to
defer.
By default, the voltage of each channel is reset to 0 volts when a patch is loaded. You can select the hold option to preserve the voltage as the patch is loaded, or saved to recall the voltage from the saved patch state.
(divider row)§
Patch quickload step§
Identical to the patch quickload step system setting, and used only if that system setting is set to
defer.
Identical also to the patch load step setting, and applied if a patch load is hastened with .
Patch quickload value§
Identical to the patch quickload value system setting, and used only if that system setting is set to
defer.
Identical also to the patch load value setting, and applied if a patch load is hastened with .